Crown CM-311A User Manual download pdf (Page 7)

Installed Microphones

Boundary Layer Microphones

•

Polar pattern:

Frequency response:

Sensitivity:

Maximum SPL:

Equivalent noise level:

Signal/noise ratio:

Impedance:

Finish:

Dimensions:

Net weight:

Cable:

Connector:

Hemispherical

50 to 16 kHz

0.8 mV/Pa (-62 dBV)

120 dB

21 dB-A

73 dB (A-weighted)

150 ohms

Satin black

8.7 x 15 x 1.86 cm (3.409 x 5.9 x 0.732 in.)

115 g (4 oz.)

2,4 m (8 ft.)

3-pin XLR

•

Polar pattern:

Frequency response:

Sensitivity:

Maximum SPL:

Signal/noise ratio:

Impedance:

Finish:

Dimensions:

Net weight:

Cable:

Hemispherical

50 Hz to 16 kHz

20 mV/Pa (-54 dBV)

120 dB

73 dB (A-weighted)

1,600 ohms

Satin black

8.7 x 15 x 1.86 cm (3.409 x 5.9 x 0.732 in.)

115 g (4 oz.)

10 foot with mini phone plug, 1/4 phone

plug and micro phone plug adapters

Music recordings

Conferencing and lectern

Home video production

Broadcasting

• Hemispherical polar patter

• Clear, bright sound quality with excellent bass

• Works on internal AAA battery or phantom power

• Low-impedance XLR-type output

• Boundary “paddle” can be detached

The PZM

-185 Pressure Zone Microphone

is a bud-

get microphone designed for general-purpose use.

Ideal for applications such as conferences, group dis-

cussions, interviews, broadcast, homevideo production,

lectures, and recordings. The mic can be placed on a

large surface such as a table, floor, wall, or lectern.

The PZM

-185 is powered either by an internal

AAA 1.5 V battery or 12-48 V phantom power. The

boundary “paddle” can be detached so the mic will fit

in your pocket. It is nearly invisible on camera. The

PZM

-185 minimizes pickup of vibration and handling

noise. It provides a wide, smooth frequency response

from 50 Hz to 16 kHz. The mic’s hemispherical polar

pattern allows clear pickup of everyone surrounding

the microphone. The PZM

-185 is protected against

static and RFI. The output is balanced, low impedance,

which allows long cable runs without hum pickup or

high-frequency loss.

Item number:

PZM185 6000H50030

PZM

-185

Theater

Conference

Houses of worship

Home video production

• PZM

design makes the sound clearer and more natural

• Ideal for recording conferences, interviews, home videos

• AAA battery powered

• Medium-impedance unbalanced output

• 1/8” (3.5 mm) phone connector

The Crown

Sound Grabber II utilizes the Pressure Zone

Microphone

technology in which sound waves reinfor-

ce themselves in the area nearest a flat surface.

Because of this new technology, Sound Grabber II offers

you the opportunity for vast improvement in the quality

of your recordings. The Sound Grabber II will pick up

sounds at distances you never thought possible and it

will pick them up with a clarity that other microphones,

because of the limitations of their construction, simply

cannot match. The Sound Grabber II does not need to

follow the action, since it has a wide-angle pickup pat-

tern. So long as the mic “sees” the sound, in whatever

direction or angle, it will pick it up clearly; it does not

need to be between you and the other person. Speakers

or vocalists can move freely around the Sound Grabber

II without their tone quality changing.

Item number:

SNDGRABBER2 6000H50000

SOUND GRABBER II

akg-crown-folder_2608 27.08.2008 9:13 Uhr Seite 7

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Crown CM-311A User Manual Page 7

Comments to this Manuals

Related products and manuals for Microphones Crown CM-311A