Crown D Series Specifications Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
Page 12
D-45 / D-75A Power Amplifiers
Input Sensitivity: Configurable for 26 dB gain or 0.775
volt sensitivity (see Appendix A).
Output Connector:
Barrier block terminals and stereo
headphone jack. The headphone output is unpadded,
and in parallel with the main amplifier outputs.
Output Impedance: Less than 15 milliohms in series
with less than 3 microhenries.
DC Output Offset: 10 millivolts or less.
Output Signal
Dual: Unbalanced, two channel.
Bridge-Mono: Balanced, single channel. Channel 1
controls are active; channel 2 controls should be turned
down.
Protection
Input: The inputs have series resistance that provides
input overload protection. Controlled slew rate voltage
amplifiers protect against radio frequencies. The AC
line is fused to protect against excessive current draw.
Output: Instantaneous limiting protection for short cir-
cuits, open circuits and mismatched loads.
Turn-On:
Minimum thumps. Power-up is instantaneous
with no program delay.
Construction
Durable black finish on aluminum front panel with gray
suede Lexan insert. Aluminum chassis provides maxi-
mum heat conduction and minimum weight.
Dimensions: 19 inch (48.3 cm) rack mount width,
1.75 inch (4.5 cm) height, 8.5 inch (21.6 cm) depth
behind the mounting surface, and a 0.625 inch (1.6 cm)
protrusion in front of the mounting surface
Approximate Weight:
D-45:
8 pounds, 11 ounces (3.9 kg) net; 10 pounds,
9 ounces (4.8 kg) shipping weight.
D-75A:
9 pounds, 7 ounces (4.3 kg) net; 11 pounds,
4 ounces (5.1 kg) shipping weight.
Cooling: The amplifier is totally convection cooled. The
entire aluminum chassis acts as a conductor to dissi-
pate heat. The covers and front panel extrusion also
act as heat sinks. Much of the unit’s heat is conducted
through the extruded front panel. This design is used
so that front panel contact with the equipment rack will
also dissipate heat.
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments