Crown SST-SBSC Specifications download pdf (Page 10)

Page 19Page 18

Reference Manual

CE 4000 The amp with an Attitude!CE 4000 The amp with an Attitude!

If you are running your equipment in dusty or dirty environ-

ments, it is advisable to pre-filter the air using industrial

furnace filters. These filters can be taped or fastened to the

front of the equipment rack, ensuring a clean air supply

through a large surface area that will require minimum

maintenance.

2.7—Check once more to make sure the amplifier has

been set up correctly. Then follow the steps in the Opera-

tion section to operate the amplifier.

2.6—Check to make sure that adequate ventilation has

been provided. Even though this amplifier has some of

the most efficient heat sinks in the marketplace, it must be

able to breathe. So make sure that the front vents are

never blocked and that the exhaust fan (out the back)

notblocked or covered by cables.

An amplifier running at high sound pressure levels into

low-impedance loads will typically put out lots of hot air,

so make sure it can go somewhere.

Cooling Tips

If you allow spaces between pieces of equipment in your rack,

make sure you block the front with blank, solid (not perforated) pan-

els. This will allow the rack to act as a chimney with hot air exhaust-

ing at the top, not recirculating between adjacent amplifiers.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

Crown SST-SBSC Specifications Page 10