Crown PIP-USP3 Specifications

Array Application Guide v06A Guide to Assist in the Specifying of JBL Application Engineered TM Series Products With Pre-De

Depending on the height of the bleacher sections and associated vertical coverage requirements the horn may be left in its standard orientation wi

ARRAY TIPS Modeling Arrays in Rooms The arrays included in this array guide have been developed to provide good coverage consistency throughout th

5) If both loudspeakers are full-range devices, the addition of the down-fill device will affect the long-throw response by increasing level in th

3) Loudspeaker Array Low-Frequency Pattern Control using Filtered Array Technology; JBL Professional Application Note. 4) JBL Audio Engineering

Planar Array Frames and Rigging Brackets Planar Array Frames (PAFs) provide a pre-engineered solution to rig several of the arrays found in this

The second example shows the same three enclosures arranged in a spherical array with independent aiming capabilities (fig. 9). Note that the dire

Two-element Vertical Array in Long-Throw/Short-Throw Configuration Array 2 Application Engineered 3-way 15” and Mid-High loudspeake

Two-element Spherical Array Array 3 Application Engineered 2-way 12” loudspeakers horizontally splayed  This array is a good soluti

Two-element Spherical Array Array 4 Application Engineered 2-way 15” loudspeakers horizontally splayed  This array is a good solution

Table of Contents Page Introduction 3 Suspending Loudspeaker Arrays 4-5 Array Applications: 6-10 Speech Systems Combination Speech & Mus

Two-element Horizontal Array with Subwoofer Array 5 Application Engineered 2-way 12” loudspeakers horizontally splayed plus subwoofer 

Three-element Horizontal Array in a Wide Coverage Configuration Array 6 Application Engineered Mid/High loudspeakers horizontally splaye

Two-element Horizontal Array with Subwoofer Array 7 Application Engineered 3-way 15” loudspeakers horizontally splayed plus Subwoofer 

2-Way Vertical Enclosures with Subwoofer Array 8/9 Application Engineered 2-way 12” or 15” loudspeakers with ASB6112 or ASB6115 Subwoof

 This array is a good choice for medium-sized rooms as a center cluster or as part of a Left/Right or exploded cluster system.  High

 This array is a good choice for medium-sized rooms as a center cluster or as part of a Left/Right or exploded cluster system.  Th

Two-element Vertical Array in a Long-Throw/Short-Throw Configuration Array 13 Application Engineered 2-way 12” loudspeakers horizontall

Two-element Vertical Array in a Long-Throw/Short-Throw Configuration Array 14 Application Engineered 2-way 15” loudspeakers horizontally c

Two-element Vertical Array in a Long-Throw/Short-Throw Configuration Array 15 Application Engineered 3-way 15” loudspeakers horizontally

WEATHER RESISTANT Configurations for AE, PD & VLA Series JBL offers two standard levels of weather resistance for AE, PD and VLA Series louds

Introduction This edition of the Array Application Guide focuses on how Application Engineered TM Series loudspeakers can provide the building b

Painting AE and PD Series Loudspeaker Enclosures JBL AE and PD Series loudspeakers are available in black, white or unfinished. When ordering, th

Reattach the backing securely using 3M Super 77 or similar spray adhesive, sprayed onto the back of the metal grille (spray only a minimal amount

AE/PD Series Connector Pin-Out GuideModelsConnector Type & Pinouts Crossover ModePD Series and AM High-Power 3-Ways (bi-amp/tri-amp selectable)AM7

Suspending Loudspeaker Arrays IMPORTANT SAFETY WARNING! The information in this section has been assembled from recognized engineering data and

The installation of the hardware and method of attachment must be carried out in the manner specified by the Professional Engineer. Improper ins

Array Applications The arrays described in this guide are developed to meet the performance goals of a wide variety of applications. Array recomm

For larger center clusters arrays 10, 11, or 12 may be considered. For three- and four-cluster systems as described above (see Figure 3), the

Some of the array types described incorporate subwoofers integrated into the array; others do not. Subwoofers are often a requirement for syst

High-Impact Music Systems While these systems are also sometimes used for speech, their primary purpose indicates that the arrays must produce hig