Crown POWER-TECH 3 Owner's Manual download pdf (Page 7)

English

SPEAKER PLACEMENT

Horizontal

Coverage

Window

The compact width and depth dimensions of the M2

allow ﬂexibility of placement in a range of production

spaces, whether free standing, positioned adjacent

to a wall, or in a corner. Digital signal processing in

the M2 system’s Crown ampliﬁer or BSS Soundweb

London processor provides room-tuning capability

that can reduce the negative effect of room modes

(standing waves) and compensate for deviations

in response created by the speaker’s proximity to

the room’s boundaries. This provides exceptional

placement ﬂexibility, even when M2s are installed in

relatively small control rooms or project studios.

Please observe these guidelines when

placing M2 speakers in the workspace:

• Do not place the M2 near a heat register or a

source of open ﬂame (such as a ﬁreplace).

• Do not expose the M2 to moisture, dripping or

humid environments.

• Take precautions to ensure that animals do not

enter the speakers’ port openings.

• To protect the woofer cone from potential

damage, always use the speaker with the

supplied grille attached.

For optimum performance

please review and observe

the following guidelines:

To achieve optimum performance

at the listening position the listener

should be seated within ±30° of the

waveguide’s horizontal centerline (see

illustration to the left). If necessary,

the M2 speaker should be angled

towards the listener to keep the

listener within the coverage window.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Crown POWER-TECH 3 Owner's Manual Page 7