FISHMAN POCKET BLENDER
13
SUGGESTED INPUT OPTIONS
1) INTERNAL MICROPHONE AND PICKUP
Pickup goes to Tip, microphone goes to Ring.
Pickup and microphone signals are routed through a
stereo instrument cable to the INPUT jack.
Pickup signal is controlled by TRANSDUCER Channel.
Microphone signal is controlled by MICROPHONE
Channel.
The Phantom Power should be turned on
(switch pushed IN).
NOTE: If your instrument has an onboard battery, and you want to
route microphone and pickup signals through a stereo instrument
cable, you may need to install a Fishman SMART SWITCH for the
system to operate. See Page 23
2) PICKUP ALONE
Single pickup is sent through a mono instrument cable
to the INPUT jack.
The signal is controlled by the TRANSDUCER Channel.
Under battery power, turn the Phantom Power OFF
(switch pushed OUT) to save battery life.
3) MINI-MICROPHONE ALONE
Microphone is sent through a mono instrument cable
to the RING jack of a stereo "Y" cable (available from
Fishman). The signal is controlled by the MICRO-
PHONE channel.
The Phantom Power is ON (switch is IN).
Comments to this Manuals