Crown GLM-200 Specifications download pdf (Page 9)

FISHMAN POCKET BLENDER

VOLUME CONTROL

Controls the volume of the TRANSDUCER channel.

BASS AND TREBLE CONTROLS

Controls the BASS and TREBLE for the TRANSDUCER channel.

These are boost/cut shelving tone controls. Setting them at 12:00 yields a flat response.

TRIM CONTROL

Sets the TRANSDUCER channel sensitivity for optimum signal strength before clipping.

To attain the best signal to noise ratio, start with the control fully clockwise and play your loud-

est note or chord. If you hear distortion, lower the control with a small slotted screwdriver until

the distortion disappears.

The Trim control can also be used to calibrate the MICROPHONE and TRANSDUCER Gain con-

trols. If there is a disparity between the signal strength of the two channels, use the Trim control

to "normalize" the levels. Try setting the Trim controls this way.:

1) Set the Master Volume to 3:00.

2) Set the MICROPHONE and TRANSDUCER Channel levels to 12:00.

3) Play a note or chord on your instrument and lower the MICROPHONE or TRANSDUCER

Trim control until both levels are equal, or are balanced to suit your taste.

PHASE SWITCHES

Compensate for Phase differences that often occur between instrument, microphone,

pickup and speaker.

Refer to Page 8 for more information on How to Use the POCKET BLENDER's Phase Switches.

FRONT PANEL

TRANSDUCER

CHANNEL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Crown GLM-200 Specifications Page 9