Crown GLM-200 Specifications download pdf (Page 11)

FISHMAN POCKET BLENDER

REAR PANEL

PHANTOM POWER SWITCH

Pushing this switch IN turns the Phantom Power ON.

The IN position provides 9 volts of phantom power to the Ring of the Input jack.

Pushing this switch OUT shuts OFF the Phantom Power. Shut off the Phantom Power when

using a dynamic microphone or pickup in the MICROPHONE channel.

INPUT JACK

The INPUT jack is a TRS (Tip/Ring/Sleeve) input that can accept two discrete signals through a

stereo instrument cable.

Two signals from your instrument (For example: Internal Microphone and Pickup) are routed

through a stereo instrument cable to the INPUT jack. The Ring goes to the MICROPHONE

channel and the Tip goes to the TRANSDUCER channel.

See Page 3.

EFFECTS LOOPS

The MICROPHONE Effects Loop allows you to interface the MICROPHONE channel signal

with outboard effects and signal processors.

The MICROPHONE channel Send is affected by the:

• Bass and Treble controls

• Trim control

• HI cut and LO cut switches

• Phase switch

The MICROPHONE channel Return is affected by the:

• Volume and Master Volume controls

• Mute Switch

The TRANSDUCER Effects Loop allows you to connect the TRANSDUCER channel signal with

outboard effects and signal processors. See Page 16.

The TRANSDUCER channel Send is affected by the:

• Bass and Treble controls

• Trim control

• Phase switch

The TRANSDUCER channel Return is affected by the:

• Volume and Master Volume controls

• Phase and Mute switches

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Crown GLM-200 Specifications Page 11