Crown GLM-200 Specifications download pdf (Page 14)

4) PIEZO AND MAGNETIC PICKUP

A) Signal from piezo is routed through a

mono instrument cable to the TIP jack

of a stereo "Y" cable

(available from Fishman).

This signal is controlled by the TRANS-

DUCER channel.

B) Signal from magnetic pickup is sent

through a mono instrument cable to the

RING jack of a stereo "Y" cable (available

from Fishman). This signal is controlled by

the MICROPHONE channel.

Phantom Power must be turned OFF

(switch is pushed OUT).

NOTE: Both signals may be routed through a stereo

instrument cable.

5) UNDER-SADDLE PICKUP AND

SURFACE-MOUNT PIEZO PICKUPS

A) Signals from both pickups are sent

through a stereo instrument cable to

the INPUT jack.

B) Under-saddle pickup signal (TIP) is

routed to the TRANSDUCER channel.

C) Surface-mount pickup (RING) is routed to

the MICROPHONE channel.

Phantom power is OFF

(switch pushed OUT).

NOTE: Both signals may be routed through two mono

instrument cables and a stereo "Y" cable.

6) PICKUP AND

DYNAMIC MICROPHONE

A) Signal from pickup is sent through a

mono instrument cable to the TIP jack

of a stereo "Y" cable (available from

Fishman).

B) Signal from dynamic microphone (possi-

bly for vocals) is sent through a mono instru-

ment cable to the Ring jack of a stereo

"Y"cable.

Phantom power is OFF

(switch pushed OUT).

FISHMAN POCKET BLENDER

14

SUGGESTED INPUT OPTIONS, Continued

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments