Crown GLM-200 Specifications download pdf (Page 7)

FISHMAN POCKET BLENDER

VOLUME CONTROL

Controls the volume of the MICROPHONE channel.

BASS AND TREBLE CONTROLS

Control the BASS and TREBLE for the MICROPHONE channel.

These are boost/cut shelving tone controls. Setting them at 12:00 yields a flat response.

TRIM CONTROL

Sets the MICROPHONE channel sensitivity for optimum signal strength before clipping.

To attain the best signal to noise ratio, start with the control fully clockwise and play your loud-

est note or chord. If you hear distortion, lower the control with a small slotted screwdriver until

the distortion disappears.

The Trim control can also be used to calibrate the MICROPHONE and TRANSDUCER Volume

controls. If there is a disparity between the signal strength of the two channels, use the Trim

control to "normalize" the levels.

Try setting the Trim controls this way:

1) Set the Master Volume to 3:00.

2) Set the MICROPHONE and TRANSDUCER Channel levels to 12:00.

3) Play a note or chord on your instrument and lower the MICROPHONE or TRANSDUCER

Trim control until both levels are equal, or are balanced to suit your taste.

PHASE SWITCHES

Compensate for Phase differences that often occur between instrument, microphone,

pickup and speaker.

FRONT PANEL

MICROPHONE

CHANNEL

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Crown GLM-200 Specifications Page 7